Creative Common Attribution-NonCommercial-ShareAlike CC BY-NC-SA

Pug Saddle Tank -Revision 2 – Optional changes Aug 2023
This update provides:
1.     Revised frames and frame stretchers to allow access for a ball driver/screw driver to the frame side screws with clearance from the wheels. This aids assembly.
2.     A revised footplate moves the battery holder forward to give clearance for a firebox LED if desired. Also this footplate accommodates a Hornby HM7000-21TXS Bluetooth DCC decoder and connection adaptor board in place of the previously fitted 'Locoremote' controller.

A simple gauge to check for 45mm track gauge & buffer heights. Track gauge faults cause derailments. Buffer height variations lead to buffer locking on curves & then mysterious derailments on straights.

Four wheel horsebox with groomsman compartment built by the SER on an 8'6" wheelbase chassis. Would have likely later been modified by the SECR to have brakes or at least through-piped. These units were used into SR service and were more numerous than the 6-wheel design. Drawn in 10mm scale

The SR precast concrete PW platelayers hut, 1:32 scale, four files zipped into one folder.

Drawing & STL files from Ole Holm's article in G1MRA NLJ 276 on making a diamond crossing. G1MRA members can read the article online or in their paper copy on pages 41/42. Non members will need to find a G1MRA friend to realise what they are missing.

G3 Track, 64mm (2.52") Gauge Curve 700mm radius, straight 300mm, turnout, end stop and 90-degree crossing. Should be printable on 220 x220. Peter Davis

Folder for some experimental BR Mark 1 coach STLs. The models are all aimed at using the Creality CR-30 belt printer which allows the whole coach to be printed in one length.

A selection of models loosely based on the popular series.